Epson EB-S01 Service Manual page 130

EB-S01/W01/X14G/S11/X11/S02/S02H/X02/W02/S12/S12H/X12/W12/X14 EH-TW480
When reassembling the BDM/GDM, take care in the following instructions.
1. Install the BDM/GDM into the engine with their markings coming on the top
right as seen from the incidence side.
Black Marking
GDM
LIGHT GUIDE,LOWER
SEIKO EPSON
Blue Marking
BDM
Figure 4-17.
Maintenance
2. Insert the BDM/GDM without any gap between the bottom of them and the
LIGHT GUIDE,LOWER.
No gap in between
3. Insert the springs without any gap between the bottom and the LIGHT
GUIDE,LOWER to secure the BDM/GDM
Spring,Mirror Fixing,FIF
130
CONFIDENTIAL
BDM/GDM
LIGHT GUIDE,LOWER
Figure 4-18.
BDM/GDM
LIGHT GUIDE,LOWER
Figure 4-19.
Revision C