Using Spray Nozzle; How To Apply Detergent - Ford FPWG3400H Operator's Manual

Using Spray Nozzle (See fig 15)
• To connect or disconnect spray tip, pull back on the quick-connect collar. Insert or remove spray tip then release collar.
• When spray tip is connected, pull on the spray tip to make sure it is secured.
• For general cleaning use the 40° spray tip. This option is for cement walkways.
• For stripping, spot cleaning, blasting, and hard to reach areas use the 25° spray tip. This option is for removing paint,
rust, mildew, marine growth off boats, or grease stains. This option can be used for reaching second story surfaces, or
for the removal of paint, rust, oil stains, tar, gum, and other stubborn substances. Use extreme caution when using this
nozzle.
• For applying pressure washer safe detergent, use the black soap nozzle.
Only use detergents or soaps that are safe to be used with pressure washers. Chemicals
WARNING!
which are caustic, such as acids or bleach, can result in serious injury, property damage,
or death.
Rinsing with the Pressure Washer
• Test a small area first to avoid surface damage.
• Rinse from top to bottom using long, overlapping strokes.
Moving the Pressure Washer
• Turn the pressure washer off.
• Tilt unit towards you until it is balanced on its wheels.
• Roll machine to desired location.
SPRAY
WAND
NOZZLE
"CLICK"
FIG 15
OPERATION
17