JLab JBuds Air Pro - Earbuds Manual

Also See for JBuds Air Pro:

Manual (4 pages)

Table of Contents

Contents

1 BLUETOOTH PAIRING
2 BUTTON FUNCTIONS
3 VOICE PROMPTS
4 CUSTOM EQ3 SOUND MODES
5 CHARGING EARBUDS
6 CHARGING CASE
7 MULTIPOINT
8 FITTING
9 FIND YOUR EARBUDS
10 DOWNLOAD THE APP
11 TROUBLESHOOTING
12 QUICK TIPS
13 Documents / Resources
- 13.1 References
- 13.2 Download manual

JLab JBuds Air Pro - Earbuds Manual

BLUETOOTH PAIRING

Take earbuds out of case and remove stickers. Place earbuds back in case and close door.
Blue lights on case indicates charging. Remove earbuds from case.
One earbud will blink blue/white indicating ready to pair to your device. Select "JLab JBuds Air Pro" in your device's Bluetooth settings.

ADDING NEW / ADDITIONAL BLUETOOTH DEVICES:
Turn OFF Bluetooth from any previously connected device.
Turn ON Bluetoothfrom new device.
Earbuds will automatically enter Bluetooth Pairing.
Select "JLab JBuds Air Pro" in new device settings to connect.

BUTTON FUNCTIONS

BUTTON FUNCTIONS
LEFT EARBUD
VOLUME DOWN: Single tap
SIRI (iOS) or "OK GOOGLE" (ANDROID): Double tap
MUSIC / MOVIE MODE: Press & hold 1+ sec
TURN ON: Press & hold 3+ sec
CHANGE EQ: Triple tap (JBuds Air Pro will cycle 3 EQ settings)

RIGHT EARBUD
VOLUME UP: Single tap
ANSWER: Single tap HANGUP: Double tap
REJECT INCOMING CALLS: Press & hold 1+ sec
PLAY / PAUSE: Double tap
TRACK FORWARD: Press & hold 1+ sec
TURN ON: Press & hold 3+ sec
BE AWARE: Triple tap

TURN OFF WITHOUT CHARGING CASE:
Turn off Bluetooth from device settings. Earbuds will power off after 3 minutes.

VOICE PROMPTS

"Ready to Pair": JBuds Air Pro are ready to pair to Bluetooth device
"Battery Full": 100-80%
"Battery Medium": 80-20%
"Low Battery": Less than 20%
When power decreases to 10%, "Low Battery" will play

CUSTOM EQ³ SOUND MODES

Tap either the right or left earbud 3 times for different EQ settings (JBuds Air Pro will cycle 3 EQ settings).
CUSTOM EQ3 SOUND MODES
JLab SIGNATURE
JLab C3™ signature sound with amplified bass and vocals
BALANCED
Even sound with no additional enhancements
BASS BOOST
Amplified bass and sub-bass

CHARGING EARBUDS

Placing in the charging case will auto power OFF and start charging.
Blue lights will indicate earbuds are charging and will turn OFF when fully charged.
Removing the earbuds will auto power ON and connect to last device.
CHARGING EARBUDS

CHARGING CASE

Connect the JBuds Air Pro to computer or USB 5V 1A (or less) output device.
LEDs pulse white when charging and turn solid white when fully charged.
CHARGING CASE

MULTIPOINT

(connect 2 devices simultaneously)

Once FIRST device is connected, turn off Bluetooth in device settings. JBuds Air Pro will auto enter Bluetooth Pairing.
Enter your SECOND device Bluetooth settings and connect to JBuds Air Pro.
Enter your FIRST device Bluetooth settings. Turn on Bluetooth and connect to JLab JBuds Air Pro.

FITTING

Try all the optional Cush Fins and ear tips for best fit and proper seal.

Place in ear and rotate for best fit.

FIND YOUR EARBUDS

Download the Tile app and activate to find your earbuds.
Learn more at jlab.com/tileapp
Activating Tile will reduce earbud playtime.

Customize JBuds Air Pro features and update the latest software.
Download the JLab Sound App in Apple/Google Play Store.

TROUBLESHOOTING

NO AUDIO IN ONE EARBUD OR EARBUDS DISCONNECTED (MANUAL RESET)

Keep earbuds in the charging case and forget "JLab JBuds Air Pro" in your Bluetooth device settings.
Quick tap 7x on one earbud in charging case. Earbud blinks blue 4 times.
Quick tap 7x on other earbud in charging case. Earbud blinks blue 4 times.
Take both earbuds out of the charging case. One earbud will blink blue/white indicating ready to pair to your device.

QUICK TIPS

Either earbud can connect to your device and be used independently. Simply take out the earbud from charging case and it will auto connect.
Choosing the correct ear tip makes a significant improvement in audio quality due to proper seal for the driver. Try all ear tips for best results.

Fully dry off the earbuds before putting in the charging case to avoid any damage to the case.
The earbuds are sweat/water resistant but the case is not.

Avoid extreme heat, cold, and humidity.
Avoid dropping or crushing the earbuds.
Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
If you experience regular discomfort while using this product, discontinue use and consult your physician.
We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

Shop products | Product alerts | Burn-in your headphones

JLab Store + Burn-in Tool

JLAB.COM

YOUR WARRANTY
All warranty claims are subject to JLab authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
Reach out to us at support@jlab.com or visit jlab.com/contact