Download Print this page
JLab JBuds Air Manual

JLab JBuds Air Manual

Advertisement

Quick Links

We love that you are rocking JLab Audio!
We take pride in our products and fully stand behind them.
30
DAY
FIRST TIME SETUP: BLUETOOTH PAIRING
AUTO-CONNECTING EARBUDS
1
Press and hold 3+ seconds on both buttons.
White lights will flash to indicate earbuds
are automatically pairing to each other.
CONNECTING TO BLUETOOTH
3
Select "JLab JBuds Air" in your device settings. Voice prompt "Bluetooth connected" followed by solid white lights
will indicate you are connected. You will now be ready to use your JBuds Air.
PAIRING NEW
/
ADDITIONAL BLUETOOTH DEVICES:
When earbuds are powered off, press and hold Right Earbud button 10+ seconds. The earbud will flash blue and white
indicating it is ready to pair to your Bluetooth device. Once connected, turn on Left Earbud to auto connect both earbuds.
ACCESSORIES
3 GEL TIP
2 CUSH
USB CABLE
SIZES
FINS™
YOUR SATISFACTION IS GUARANTEED
You may exchange or return merchandise within 30 days of the purchase date. Please return the item to
the location you purchased it. If your item has been opened or used, restrictions may apply.
YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to JLab Audio
authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.
CONTACT US
support@jlabaudio.com
Reach out to us at
Settings
Bluetooth
JLab JBuds Air
CHARGING
CASE
or visit jlabaudio.com/contact.
CONNECTING TO BLUETOOTH
2
Once earbuds pair, the right earbud will flash blue and white
indicating the earbuds are ready to pair to your Bluetooth device.
Left earbud will be solid white.
Settings
Bluetooth

Advertisement

loading

  Summary of Contents for JLab JBuds Air

  • Page 1 Settings Bluetooth CONNECTING TO BLUETOOTH Select “JLab JBuds Air” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected. You will now be ready to use your JBuds Air. Settings Bluetooth...
  • Page 2: Button Functions

    SIRI (iOS) or “OK GOOGLE” (ANDROID): 2 clicks. TRACK FORWARD: Press & hold 1+ seconds. EQUALIZER MODES Click either the right or left earbud 3 times for different EQ settings (JBuds Air will cycle 3 EQ settings). JLab SIGNATURE BALANCED BASS BOOST JLab C3™ signature...
  • Page 3: Troubleshooting

    Note: To avoid having to reconnect the earbuds again, make sure you return the earbuds to the correct spot in the case. See Charging Earbuds. ECHOES ON CALLS If you experience microphone echo/call quality with the JBuds Air, make sure the Cush Fin is not blocking the microphone port. Microphone covered Microphone open...
  • Page 4 The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Normal, everyday use can also burn-in the headphones though JLab’s proprietary burn-in provides an ideal mix of sounds and frequency sweeps to achieve this.