MD SPORTS 18405 Assembly Instructions Manual page 7

6. Lift the table assembly from the floor with at least two strong adults, turn it over, and set the
table assembly on its legs in the location where you play.
CAUTION: Two strong adults are recommended to turn the table over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
FIG.2 TABLE TENNIS TABLE TOP ASSEMBLY
7.Tear off the backside paper of the Pad (#14) and stick them at the bottom of the Table
Tennis Surface (#7 & #8). See FIG.2.
8. Insert the Dowel (#9) into the hole of the Table Tennis Surface. See FIG.2A.
9. Put together the Table Tennis Surface - A (#7) and Table Tennis Surface - B (#8).
FIG.2
28
29
22
#14
FIG.2A
#14
#9
HOLD TABLE
#8
#7
#9
#14
6
24
DO NOT LEAN THE
CABINET
DO NOT
TABLE ON ITS LEGS!
HOLD THE
LEGS