Advertisement
Package Contents:
1XTitan A8 Pro
1XPower Cord
1XRJ 45 Cable
1XThis Technical Manual
Product Warranty is void if product is not installed as per installation instructions and in
compliance with all local and provincial codes.
SAFETY RECOMMENDATIONS AND WARNINGS
Only use this device in dry environments (indoor use)
Do not make modifications or alter the product
Keep away from flammable material.
Do not use any silicone or other chemicals on outside surface.
Do not use chemicals or abrasives to clean the device as this many voids the warranty.
Ensure installation complies with local electrical rules and regulations.
Ensure mains input power is surge protected
Do not connect or disconnect the device while the power is connected.
Connectors are to be kept clean and dry at all times.
Input Voltage range 90-132VA/180-264VC by switch
Power off the device during service or when not in use.
Twisted pair cable is recommended for data transmission
Avoid unwanted voltage on the DMX cables at all times.
Do not remove any parts from the unit including the plug ground pin or connect to an
ungrounded circuit.
Do no connect the unit to LEDs that are switched on.
To supply this unit with power, first connect the provided power cord to the unit and then to
a suitable power outlet.
www.colordreamer.com
Email:info@colordreamer.com
Version:V1.0 Feb 2022
Products and specifications are subject to change without notice
Advertisement
