Advertisement
Quick Links
Pixel Driver 1200
Titan A8 Pro
TITAN A8 Pro
Thank you for purchasing the Colordreamer Pixel Driver 1200!
Our manual will describe the installation and mounting of the product as well as
description of how to use it.
Please read and understand this manual in its entirety before using the product.
www.colordreamer.com
Products and specifications are subject to change without notice
Client
Project
Order Code
QTY
Email:info@colordreamer.com
Version:V1.0 Feb 2022
Advertisement
Summary of Contents for Colordreamer Titan A8 Pro
- Page 1 Project Order Code TITAN A8 Pro Thank you for purchasing the Colordreamer Pixel Driver 1200! Our manual will describe the installation and mounting of the product as well as description of how to use it. Please read and understand this manual in its entirety before using the product.
-
Page 2: Safety Recommendations And Warnings
Do no connect the unit to LEDs that are switched on. To supply this unit with power, first connect the provided power cord to the unit and then to a suitable power outlet. www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice... -
Page 3: Product Specification
Product Overview Pixel Driver 1200 Titan A8 Pro is an eight universe Artnet to DMX driver designed for any DMX Pixel Products. It has an integral 1200W 24VDC power supply for up to eight outputs based upon eight universes received via Art-Net Each output can provide maximum 150W+512DMX channels to LED Fittings. - Page 4 Dimension www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice...
- Page 5 Power cable not connected. The device has no power Permanently Green: Connected to Power. Power is on. D: Status LED for Ethernet Link Status Description Powered Off Ethernet not connected www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice...
- Page 6 F: Status LED for Ethernet Activity Status Description Powerer Off No data received over ethernet Permanently Green or Communicating over Ethernet. Receiving data over ethernet Blinking Green 4PIN Connector Layout www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice...
- Page 7 Device Configuration Through onboard Screen and Push/Dial button Standby Screen: When you are not performing a task within a menu, Titan A8 Pro will display device information as below. Press and release the rotary dial to enter the Device Configuration Menu.
- Page 8 2: User can use Color Test Page to test your led fitting when software is not ready. Color DepthW/RG/RGB/RGBW R: a value between 0-255 G: a value between 0-255 B: a value between 0-255 W: a value between 0-255 www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice...
- Page 9 Open your web browser and enter the IP address of Artnet Controller 192.168.1.100 Step 4) The web configuration tool will be launched. Step5)You can change IP address and save this configuration www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice...
-
Page 10: Reset To Factory Default Settings
Continue to press the reset button and connect to power again. Step 4) Continue to press the reset button and wait until all status LEDs of the device flash repeatedly or wait 5 seconds. www.colordreamer.com Email:info@colordreamer.com Version:V1.0 Feb 2022 Products and specifications are subject to change without notice...