White Balance; Photometry - Minox DC 4011 User Manual

White Balance

Set the white balance mode.
WHITE BALANCE
Auto WB
Daylight
Fluorescence
Incandescence
1. Set the dial knob to
2. Press the menu button.
3. Press the or
4. Press the or
5. Press the menu button to exit from the menu mode.

Photometry

Set the photometry. The camera calculates the exposure level before a photograph is taken.
PHOTOMETRY
Center Weighted
Spot
1. Set the dial knob to
2. Press the menu button.
3. Press the or
4. Press the or
5. Press the menu button to exit from the menu mode.
85939-450-E.p65
ICON
.
button to select WHITE BALANCE.
button to select the desired white balance setting.
ICON
The exposure is measured and calculated for
the entire area of the screen. By dividing the
entire area of the screen, the exposure level
for each unit is calculated. A well balanced
exposure can be obtained.
The exposure is measured in a very small
area at the center of the screen. It is possible
to calculate the exposure of a subject without
being affected by the surrounding
environment.
.
button to select PHOTOMETRY.
button to select the desired photometry setting.
23
DESCRIPTION
Automatic white balance mode (default)
Day light mode
Fluorescent light mode
Incandescence light mode
DESCRIPTION
2002/11/12, ¤U¤È 01:14
23