Storage - Emerson RIDGID HD06001 Owner's Manual

STORAGE

When vacuuming is complete, your RIDGID Wet/Dry
Vac has convenient storage locations.
ACCESSORY STORAGE (Fig. 11)
1. For Storage: Slide the Extension Wands (I) and the
Accessories onto the Caster Feet Posts.
2. To Remove Wands and Accessories: Lightly rotate
and pull upward.
CORD STORAGE (Fig. 11)
1. To Store Cord: Wrap the Power Cord around the
Powerhead Carry Handle/Power Cord Wrap (C)
beneath the Two Tabs.
2. Secure the Power Cord using the Cord Clip on the
Polarized Plug.
HOSE STORAGE (Fig. 11)
1. The Tug-A-Long Positive Locking Hose with
Dual-Flex (H) may be stored around the Powerhead
Assembly (A).
WARNING:
Do not put any object into ventilation openings.
Do not vacuum with any ventilation openings
blocked; keep free of dust, lint, hair or anything
that may reduce air flow.
CAUTION:
Do not operate vacuum while the hose is still
wrapped around the powerhead assembly in the
storage position.
Power Cord Clip
(I)
(J)
9
Fig. 11
(C)
Power Cord
Polarized Plug
(A)
(H)
(I)
(E)
Caster Foot Post