Teaching-In First Administrator - Gira 5551 Series Operating Instructions Manual

Fingerprint reader
Table of Contents

Advertisement

Teaching-in first administrator

Before first start-up, an administrator must be created.
If no administrator has been taught-in, the LED of the
fingerprint reader flashes green.
An administrator consists of an administrator finger and
a programming finger.
i
Administrator and programming fingers
Administrator and programming fingers cannot be
used for subsequent switching actions.
Teaching-in first administrator:
✔ The LED flashes green.
Teaching-in new administrator finger:
1. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔ During laying on the LED lights up red, after removal
orange.
2. Lay the administrator finger on again (vary position
slightly) until a short acknowledgement tone is
heard.
3. Repeat step 2 until 1 long acknowledgement tone
is heard and the LED lights up green.
The administrator finger was taught-in successfully.
6
Admin
(7x)
NEW
Progr.
(7x)
NEW

Advertisement

Table of Contents
loading

Table of Contents