Switching Acknowledgement Tones On/Off - Gira 5551 Series Operating Instructions Manual

Switching acknowledgement tones on/off

Factory setting: Acknowledgement tone is activated.
Progr.
The acknowledgement tones are activated/deactivated
as follows:
1. Lay the programming finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes orange.
2. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes orange
twice.
3. Lay the programming finger on until a short
acknowledgement tone is heard.
✔ The fingerprint reader generates a positive acknowl-
edgement signal.
The acknowledgement tone is switched over.
16
Admin Progr. = Setting changes