Table of Contents
Advertisement
Deleting user finger
Admin.
Start mode:
1. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes orange.
2. Lay the programming finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes orange
twice.
3. Lay the programming finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes red.
Delete user finger:
4. Lay on the user finger to be deleted until a short
acknowledgement tone is heard.
✔ The LED lights up orange. The fingerprint reader gen-
erates a positive acknowledgement signal:
The finger was deleted successfully.
✔ 3 brief acknowledgement tones signify that an
unknown finger was laid on.
✔ The LED flashes red. Further user fingers can be
deleted.
After approx. 10 s the procedure is terminated.
5. Remove deleted user fingers from the table on
Seite 23.
Progr.
Progr.
Delete user
13
Advertisement
Table of Contents
