Gira 5551 Series Operating Instructions Manual page 10

Fingerprint reader
Table of Contents

Advertisement

Teaching-in new administrator finger:
1. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔ During laying on the LED lights up red, after removal
orange.
2. Lay the administrator finger on again (vary position
slightly) until a short acknowledgement tone is
heard.
3. Repeat step 2 until 1 long acknowledgement tone is
heard and the LED lights up green.
The administrator finger was taught-in successfully.
✔ The LED lights up orange. Now teach-in the pro-
gramming finger within 10 s.
Teaching-in new programming finger:
4. Lay the programming finger on until a short
acknowledgement tone is heard.
✔ During laying on the LED lights up red, after removal
orange.
5. Lay the programming finger on again (vary position
slightly) until a short acknowledgement tone is
heard.
6. Repeat step 5 until 1 long acknowledgement tone is
heard and the LED lights up green.
The programming finger was taught-in successfully.
✔ An administrator was taught-in successfully.
7. Enter the administrator in the table on S. 22.
10

Advertisement

Table of Contents
loading

Table of Contents