Switching Illumination Of Contact Surface On/Off - Gira 5551 Series Operating Instructions Manual

Switching illumination of contact surface on/off

Factory setting: The night illumination of the fingerprint
reader contact surface is activated.
Progr.
Changing illumination setting:
1. Lay the programming finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes orange.
2. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔ The LED briefly lights up green, then flashes orange
twice.
3. Lay the administrator finger on until a short
acknowledgement tone is heard.
✔ The fingerprint reader generates a positive acknowl-
edgement signal.
The night illumination changes its status.
Admin Admin = Setting changes
15