Introduction; Safety Instructions - Carbest LithPowerUnit 80 User Instruction

CARBEST LithPowerUnit 80 & 120 | 814136 / 814137

1. INTRODUCTION

Thank you very much for purchasing our LithPowerUnit. With a variety of connections for charging
and discharging this unit is the perfect mobile power source for any situation.
This PowerStation is equipped with a high-quality LiFePO4 battery that can be recharged via
230V, 12/24V or a solar panel.
Before using or storing this product, please read this user manual carefully and keep it for
future reference. Charge the LithPowerUnit only with the included charging adapter.

2. SAFETY INSTRUCTIONS

Please follow the safety instructions below to prevent injuries and avoid damage of the device:
•Use the LithPowerUnit properly to avoid electric shock
•Before carrying out any work (e.g. cleaning) on the device, it must be disconnected from the
power supply.
•Do not make any modifications to the device, do not disassemble or reassemble it. Mainte-
nance and repair work may only be carried out by qualified service person.
•Handle the cables carefully to avoid damage, pull it out of the socket by the plug and not on the
power cord.
•Keep the device away from all metal objects (e.g. coins, hairpins, keys, etc.) to avoid short
circuits. A short circuit can pose a significant risk to the user
•Do not use the LithPowerUnit if the device, cables or plugs are damaged or if modifications
have been made to them, as there may be a risk of fire, explosion or injury.
•Do not drop the unit, place heavy objects on it or allow strong impact to this unit.
•Do not heat the LithPowerUnit or throw it into fire, water or other liquids. Keep the unit away
from high temperatures, open flames and sparks
•Keep it away from high humidity and dusty places, do not expose the unit to direct sunlight and
keep it in a protected indoor area.
The LithPowerUnit is not a child's toy!
•Store and use the LithPowerUnit out of the reach of children.
•Children should be supervised to ensure that they do not play with the unit.
Please observe the following instructions for setting up the LithPowerUnit:
•The unit must be positioned on a leveled surface before it is put into operation.
•Do not place it next to heat sources such as open flames and do not operate it in potentially
explosive atmospheres, near flammable materials and aggressive vapors.
Notes on operating the device:
•The device should only be charged using the supplied charger and should be set up in a
well ventilated area when charging.
•Connect the device to a power socket which is nearby and easily accessible.
•Do not disconnect any cables while the device is still in use.
•Do not cover the device with towels, clothing or other objects.
13
EN