Table of Contents
Advertisement
Preparing for Faxing
Connect the printer to the telephone line and set up the printer before using the faxing functions. Then
specify the basic setting such as sender information, date/time, and daylight saving time.
Important
•
• If the Power Disconnects:
If there is a power failure or the printer is accidentally unplug the power cord and the printer is turned off
during the printer setup or after making each setting, the settings will be as follows.
The settings for user information, directory and date/time will be retained.
If the power disconnects, the following will apply:
You will not be able to send or receive faxes, make copies, or scan originals.
When you are connecting the telephone, whether or not you can use it depends upon your
telephone line or telephone.
Setting Up Printer
The printer must be set up depending on your telephone line and use of the faxing function.
All Setup
FAX Setup Guide
Individual Setup
Connecting Telephone Line
Step 1
Setting Telephone Line Type
Step 2
Setting Receive Mode
Step 3
Setting Sender Information
Step 4
Note
• You can set the fax setting according to the instruction on the LCD.
•
Easy setup
If you set up according to the instruction on the LCD, the receive mode is set to Tel. priority mode or
Fax only mode. To receive faxes with DRPD or Network switch, change the receive mode.
Setting Receive Mode
363
Advertisement
Table of Contents
