Getting Started; Contents Of The Package; Intended Use; Safety Instructions - tams elektronik S88-A Manual

tams elektronik

1. Getting started

The instructions will help you step by step with the safe and proper installation and use of
your adapter. Before you put the adapter into operation, read this manual completely,
especially the safety instructions and the section on possible errors and their elimination. You
will then know what you have to pay attention to and thus avoid errors that sometimes can
only be rectified with a lot of effort.
Keep the instructions in a safe place so that you can restore functionality later in the event of
any malfunctions. If you pass the adapter on to another person, also give the instructions with
it.

1.1. Contents of the package


1 adapter
Patch cables and/or 6-core (flat ribbon) cables for connection to s88 feedback modules or
digital devices (interface, memory or central unit) are not included in the scope of delivery.

1.2. Intended use

The adapter is intended for use in model railway layouts as specified in the instructions. Any
other use is not in accordance with the intended use and will result in the loss of the warranty
claim. Intended use also includes reading, understanding and following all parts of the
instructions. The adapter is not intended to be used by children under the age of 14.

1.3. Safety instructions

Improper use and non-observance of the instructions can lead to incalculable hazards. Prevent
these dangers by carrying out the following measures:

Only use the adapter in closed, clean and dry rooms. Avoid moisture and splash water in
the environment. After condensation has formed, wait two hours for acclimatisation before
use.

Disconnect devices that are connected to the adapter from the power supply before
carrying out wiring work.

Only supply devices that you connect to the adapter with extra-low voltage as specified in
the technical data. Only use tested and approved transformers for this purpose.

Only plug the mains plugs of transformers into properly installed and fused earthed sockets.

Do not expose the adapter to high ambient temperatures or direct sunlight. Observe the
information on the maximum operating temperature in the technical data.

Regularly check the operational safety of the adapter and the connected devices, e.g. for
damage to the connection cables.

If you notice damage or if malfunctions occur, disconnect the connection to the power
supply immediately. Send the adapter in for inspection.
S88-A | s88-N Adapter
| 3