Table of Contents
Advertisement
S88-A | s88-N Adapter
2. Operation overview
Info: Standard s88-N
The standard s88-N regulates the assignment of commercial Ethernet patch-
cables for use in s88 feedback systems. Unlike the 6-conductor connecting cables frequently
used, the patch-cables used in computer networks are screened against outside electric
signals. Thus using patch-cables reduces the liability to interference considerably.
2.1. Adapters S88-A
The adapters S88-A have connections for both an Ethernet patch-cable (RJ-45) according to
the standard s88-N and a 6-conductor s88-connecting cable. They allow
to connect devices for the s88 bus with customary 6-pin connections via patch cables
(RJ-45) to each other;
to connect an device for the s88 bus with customary 6-pin connections to a s88-device with
RJ-45 connections according to s88-N.
2.2. Versions of the adapters S88-A
S88 adapters with socket
can be plugged directly onto the 6-pin connector of an S88 back module. If space allows and
the adapter can be plugged into the 6-pin connector of an s88 device in such a way that it has
a secure hold, it makes sense to use adapters with a socket.
Recommended use: Modules with connectors coming out from the side
S88-A-BL
Item no. 44-09100
S88-adapter with plug
are connected via a 6-core cable that is as short as possible (e.g. S88-15, item no. 44-09250-
01). They are intended for connection to s88 devices where an adapter with socket cannot be
plugged on in such a way that it sits firmly and securely. They should always be used for the
connection to the digital central unit in order to avoid mechanical damage to the S88 interface
of the central unit.
Recommended use: digital devices, modules with connectors leading out upwards
S88-A-SL
Item no. 44-09200
4 | Operation overview
tams elektronik
S88-A-BR
Item no. 44-09110
S88-A-SR
Item no. 44-09210
Advertisement
Table of Contents
