INTRODUCTION These remote controls can control current, wire feed speed, voltage or program selection. ESAB's accessories for the product can be found on page 14. Equipment The remote controls are supplied with an instruction manual. FS 002 CAN and FS 002 are delivered with 5 metres connection cable, for the other remote controls shall the connection cable be ordered separated.
Page 4
AT1 CF CAN CAN-based remote control for MMA and TIG welding. Rough setting of current Fine setting of current Locking knob Remote control for MIG/MAG welding Setting voltage Setting wire feed speed Locking knob Remote control for MMA and TIG welding Setting current Locking knob AT1 CF...
All guarantee undertakings from the supplier cease to apply if the customer himself attempts any work in the product during the guarantee period in order to rectify any faults. Spare parts may be ordered through your nearest ESAB dealer, see the last page of this publication.