Ordering Spare Parts - ESAB MTA1 CAN Instruction Manual

GB
RA T1
FS 002 CAN
FS 002
3

ORDERING SPARE PARTS

CAUTION
All guarantee undertakings from the supplier cease to apply if the customer himself
attempts any work in the product during the guarantee period in order to rectify any faults.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
bf07d1ea
CAN based adapter, used for connection of
TIG torches with +/- function for CAN based
equipment.
NOTE! Supplied with holder and 0.25 m cable.
CAN-based remote control for TIG welding.
1 Potentiometer for setting of welding current,
positions 1 - 10
2 Foot pedal for weld start and setting of welding
current.
If potentiometer is set at position 10, the
current is set, from min. to max. with the foot
pedal
If potentiometer is set at position 5, the current
is set, from min. to 50% of max. current with
the foot pedal.
Remote control for TIG welding.
1 Potentiometer for setting of welding current,
positions 1 - 10
2 Foot pedal for weld start and setting of welding
current.
If potentiometer is set at position 10, the
current is set, from min. to max. with the foot
pedal
If potentiometer is set at position 5, the current
is set, from min. to 50% of max. current with
the foot pedal.
- 5 -