Flow Chart - Ricoh Kir-P1 Technical Bulletin

Model:
K-P1, A-C2, J-P1

Flow Chart:

When machines are being connected to Macintosh with PowerPC G3/G4 processors with
Apple Talk, check the type of hub being used and follow the steps explained below.
Step 1:
Check the type of hub
customer is using
10Base fixed hub is used
No problem using
the machine
T
echnical
Dual speed hub
(10M/100Mbps) is used
Step 2:
Set the network speed of
the machine to 10Mbps
B
ulletin
Date:
03-Jul-01
100Base fixed hub is used
When the interface board
(GW-Mac) becomes available
Step 2:
Set the network speed of
the machine to 10Mbps
Step 3:
Install a dual speed hub
between the network and
the machine
PAGE: 3/3
No.:
RG058007
Step 3':
Install a interface board
(GW-Mac) on the
controller