Table of Contents
Advertisement
5. Attach the rear alignment plate (Item 6) to the rear rack posts with M6 screws (Item
6.
7.
8.
42
NE0152TO Installation Guide
3), and clip nuts (Item 4). Torque the screws to approximately 5.7 Nm +/‐ 0.1 Nm (50
inch‐pounds).
4
3
If installing the 1U air‐duct option, see the instruction on page
Connect all external cables in accordance with the "Cabling Guidelines" on
page
32.
Initialize the switch. See Chapter
6
5, "Initializing the NE0152TO".
43.
Advertisement
Table of Contents
