Table of Contents
Advertisement
Installing the NE0152TO in a Lenovo iDataPlex Rack
Statement 26
40
NE0152TO Installation Guide
This section describes how to install the NE0152TO in a Lenovo iDataPlex rack. The
iDataPlex mounting kit allows the switch to be mounted either horizontally or
vertically.
The kit must be purchased separately. It includes the following parts:
Table 7.
Lenovo Adjustable 19" 4-Post Rail Kit parts
Item number
Description
1
Switch front brackets
2
M4 screws
3
M6 screws
4
M6 clip nuts
5
Switch rear brackets
6
Rear alignment plates
Attention: The rack‐mounting frame may not be able to support the weight of the
networking switch with only the front post mounting brackets (2‐post application).
If the switch has an undesirable amount of sag, it is recommended to use a 4‐post
mounting kit.
Attention: For earthquake stability, mount the switch in a 4‐post rack.
CAUTION:
Do not place any object on top of rack‐mounted devices.
Quantity
2
16
8
8
2
2
Advertisement
Table of Contents
