Replacement Of 40-Pin Connector - Sony Digital BETACAM CA-701 Maintenance Manual

1-7. Replacement of Main Parts

1-7-2. Replacement of 40-pin connector

1. Remove the two screws (–).
2. Remove the six screws and remove the 40-pin bracket.
Screws
(M2.6 × 5)
Screws (–)
Screws
(M2 × 3)
3. Desolder the CN-1176 board and remove the 40-pin
connector.
40-pin connector
40 spots
1-6 (E)
40-pin bracket
Screws
(M2.6 × 5)
CN-1176 board
4. Solder the new 40-pin connector on the CN-1176
board.
5. Attach the 40-pin connector in the reverse order of
removal steps.
6. Check that the 40-pin connector is free by hand.
40-pin connector
CA-701