Ca4000/Bpu4000 Functions And Displays; Maintenance And Inspections; Note On The Camera Connector; Cleaning The Camera Connector - Sony SKC-4065 Operation Manual

CA4000/BPU4000
Functions and
Displays
When the unit is mounted on the F65,
compatible software versions are also
required on the CA4000 and BPU4000.
Versions 2.0 and later include additional
menus for using the SKC-4065.
For details, contact your local Sony
representative.
CA4000/BPU4000 Functions and Displays / Maintenance and Inspections
Maintenance and
Inspections
Note on the CAMERA
Connector
Always attach the connector cap when the
CAMERA connector is not in use.
Cleaning the CAMERA
Connector
When the CAMERA connector is dirty,
there is increased risk of transmission error
between the unit and the F65. If the DOCK
indicator of the F65 lights yellow or red,
clean the connector using the following
procedure.
For details on the DOCK indicator, refer to the
Operation Manual for the F65.
The following items are required to clean
the CAMERA connector.
• Recommended cotton swabs
- HUBY-340, BB-012
- Cotton swabs for cleaning optical
fibers (commercially available)
• Pure alcohol (99.5% or higher)
1
Remove the unit from the F65. (See
page 25)
If the unit is not mounted on the F65,
remove the CAMERA connector cap.
2
Press points 1 on the CAMERA
connector using your fingers or other
objects to open the protective shutter
and expose the optical contacts.
29