1-7. Replacement of Main Parts
1-7-3. Removal/Installation of flexible card wires on AD-119 board
The two flexible card wires are used between the AD-119 board and MB-651 board.
Be careful not to bend these wires. This shortens the wire life.
Disconnecting
1. Turn off the power.
2. Slide portion A in the direction indicated by the arrow, unlock it, and pull out the flexible card wires.
Inside panel
Portion A
Portion A
Flexible card wires
Connecting
n
• Be careful not to insert the flexible card wire obliquely.
• Check that the conductive surface of the flexible card wire is not so soiled with dust.
1. Slide portion A in the direction indicated by the arrow and insert the flexible card wires tightly into
each connector with the conductive surface of these wires put down.
2. Slide portion a in the reverse direction of the arrow and lock each connector.
1-7 (E)
CA-701