Troubleshooting - Electrolux EHS3920HOX User Manual

8 www.electrolux.com
• Scratches or dark stains on the
surface have no effect on how the hob
operates.
Stainless steel
• For stainless steel edges of the hob
use a special cleaner applicable for
the stainless steel.
• The stainless steel edge of the plate
can change the colour as a result of
high temperature.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.

7. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
You cannot activate or op‐
erate the hob.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
6.2 Cleaning the electric
hotplate
1. Use the cleaning powder or the
2. Clean the hob with a moist cloth and
3. Heat the hotplate to a low
4. To keep the hotplates in good shape,
Possible cause
The hob is not connected
to an electrical supply or it
is connected incorrectly.
The fuse is released.
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre
and conditions of guarantee are in the
guarantee booklet.
cleaning pad.
some detergent.
temperature and let it dry.
rub in a sewing machine oil regularly.
Polish off the oil with absorbent
paper.
Remedy
Check if the hob is correct‐
ly connected to the electri‐
cal supply. Refer to the
connection diagram.
Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse releases
again and again, contact a
qualified electrician.