Grohe F-DIGITAL User Manual page 7

ENTER AND SELECT THE FUNCTION MENU
2-4 sec
The "Function Menu" contains the following
submenu
F1 – "Automatic filling/safety shut-off"
F2 – "Calibration"
F3 – "Controller & Diverter Log-On"
F2 and F3 are for use by a Service Engineer only.
CHANGE AND SAVE SETTING OF F1
AUTOMATIC FILLING/SAFETY SHUT-OFF
The time after the faucet/shower switches off
automatically can be changed.
Enter the function menu and select F1 as
described above. Press "+" and "-" to confirm.
The timer and water flow start automatically after
confirmation.
Turn the outer ring to select the outlet (only bath
and shower) and confirm with "+" and "-".
LEAVE THE FUNCTION MENU
2-4 sec
Press and hold "power/pause" for 2-4 sec
to leave the function menu.
1x
F1 F2
1x 2x
Press and hold "+" and "-" for 2-4 sec to enter
the "Function Menu" while the Digital Controller
is switched off. Turn the outer ring to select the
specific function.
Timeout function ensures menu drop out
after 3 min.
CHANGE AND SAVE THE SETTING
Turn the outer ring counter-clockwise to stop the
timer. To re-start the timer, turn the outer ring
clockwise. Press "+" and "-" to save and leave
the menu.
1x
Indication by illuminated ring if function menu has
been left.
F3
3x
3x