Replacing The Batteries; Care Instructions - Grohe F-DIGITAL User Manual

REPLACING THE BATTERIES

Low battery capacity is indicated by a shorter display duration of the illuminated ring.
Battery type: 3x CR2450 (3V)
Only use new batteries of same make and type. Do not use rechargeable batteries.
Make sure the control
unit is dry before
removing.
FACTORY SETTINGS (DEFAULT)
All digital fittings are adjusted to the following parameter
Cold water supply: 15° C I Hot water supply: 65° C I Pressure: 3 bar
Flow rate
Temperature
Max. Temperature
SafeStop
Automatic filling/
safety shut-off

CARE INSTRUCTIONS

Please read the following care instructions because
damage to the surface and underlying material
resulting from improper treatment is not covered
by warranty.
Do not use any abrasive sponges or scouring
agents for cleaning. We also advise you not to use
cleaning agents containing solvent or acid, limescale
removers, household vinegar and cleaning agents
with acetic acid in them. They are aggressive to the
surface and will leave your fitting dull and scratched.
As the formulations of commercially available
CONTACT GROHE
grohe.com
Pull the Digital Control
Unit to remove it from
the fixation plate.
Digital basin mixer
3/4 of max. volume
23° C
56° C
42° C
1 min.
Use a coin to turn the
back plate.
Digital sink mixer
3/4 of max. volume
23° C
56° C
42° C
1 min.
cleaning agents frequently change, we cannot
guarantee they will provide the gentle care our
fittings deserve.
Clean the fitting with a little soap and a moist cloth
only, then simply rinse off and wipe dry. You can
avoid lime spots by drying the fitting each time it is
used. If lime deposits do occur, remove them with
GrohClean, our environmentally-friendly cleaning
liquid. GrohClean is specially formulated to clean the
surface of our fittings gently. GrohClean is available
from your supplier.
technicalsupport-hq@grohe.com
Remove the back plate. Replace all batteries.
Digital bath & shower
3/4 of max. volume
37° C
46° C / US: 42° C
38° C
20 min.
Page 7