Advertisement
Table of Contents
Replacing and Purchasing Consumable Parts
The gasket and stopper are consumable parts. Check once a year for
damage/deterioration.
If they are heavily stained or loose, replace them.
For replacement parts, contact customer service or the shop where you
purchased this product.
Before Contacting Customer Service
The utmost measures have been taken to ensure the quality of this product.
However, should the product be defective, contact your dealer and provide
the following information.
1. Product name
2. Model number (bottom of the product) ・ Type of stopper
3. Description of trouble (As detailed as possible)
4. Purchase date
Feel free to send any questions or comments about this product to the
shop where you purchased it.
For the purpose of performance improvement, designs, specifications
and parts shown in this publication are subject to change without notice.
URL : https://tiger-corporation.hk/
For household use
Vacuum Insulated Bottle
Instructions
Thank you for purchasing this TIGER
Vacuum Insulated Bottle.
Please read these instructions carefully
before use and observe them during use.
★
Lid cap and lid body and stopper processed with an
antimicrobial substance to ensure a clean surface.
Protective sheet
(attached to the
outside bottom)
*Make sure that all parts are present before use.
MODEL
MCS-A
Cold drinks only
Lid cap
gasket
Lid
body
(Antibacterial
★
processed
)
Spout
Cap unit
Straw
Suction
port
Stopper
(Antibacterial processed
Stopper gasket
Brim
Body
❶
Lid cap
(Antibacterial
★
processed
)
Loop
Button
★
)
Advertisement
Table of Contents
Related Manuals for Tiger MCS-A050
Summary of Contents for Tiger MCS-A050
- Page 1 However, should the product be defective, contact your dealer and provide Lid cap the following information. gasket Thank you for purchasing this TIGER 1. Product name 2. Model number (bottom of the product) ・ Type of stopper body Vacuum Insulated Bottle.
-
Page 2: Safety Precautions
Safety Precautions Be sure to follow all instructions. All safety instructions described below are intended to protect the user and other individuals Caution from physical harm and household damage. Safety instructions are classified and described according to the level of harm and damage caused by improper use, as shown below. -
Page 3: How To Use
How to Use Caution Before the first use Install only the parts intended for use Cleaning Be sure to set the cap unit in a proper with the product. position. You may notice an unusual odor coming from the material of If any other parts are installed, there is a risk Contents may leak and cause soiling. - Page 4 Pour your cold beverage into the body. After drinking the beverage, keep the body Do not fill the product above the maximum in an upright position and securely close level as shown in the figure. the lid cap. Approx. 1cm When closing the lid cap tightly, press and hold 1/2inch the top of the lid cap until you hear a click.
-
Page 5: How To Clean
How to Clean Clean the product and dry it thoroughly on the same day after every use. If stains appear inside the main body Use mild kitchen detergent (for table or cookware). When red, rust-like spots or a substance that is rough to the touch Use a soft sponge, cloth or other suitable cleaning supplies. -
Page 6: Specifications
How to remove How to attach Lid cap gasket Stopper gasket Specifications Model No. MCS-A050 When attaching the lid cap gasket, Using a finger, press the outer Capacity 0.50 L / 16.9 oz make sure to fit it completely in the...
Need help?
Do you have a question about the MCS-A050 and is the answer not in the manual?
Questions and answers