Table of Contents
Advertisement
Installing the appliance
Aligning the appliance
^ Align the appliance with the
surrounding cabinets.
The height-adjustable feet at the front
and rear can all be adjusted from the
front.
– Front: with an open-ended wrench
½" (SW 13).
The feet can be adjusted from the
top and bottom e.
5
– Rear: with a
/
16
driver via flexible shaft f.
58
" (8 mm) hex nut
A mark is located on the appliance
base and is used as a standard gauge
for height adjustment. When adjusting
the height, align this mark at 1
(32 mm) above the floor.
^ Unscrew the height-adjustable feet
until the mark on the base has
reached the indicated guide
1
dimension 1
/
4
^ Check that the appliance is level with
the surrounding cabinets.
1
/
"
4
" (32 mm).
Advertisement
Table of Contents
