Changing The Light Bulb - Miele Independence F1801SFSS Operating And Installation Manual

Miele independence f1801sfss: user guide
Table of Contents

Advertisement

Cleaning and care

Changing the light bulb

The lighting automatically switches off
after the door has been open for
approx. 5 minutes. This is not a fault.
After the bulb has cooled for a short
time it will turn on again.
If the light does not come on when the
door is opened briefly, the light bulb
should be changed.
^ Use the main switch to turn the
appliance off.
To reduce the risk of electric shock,
disconnect the appliance from the
power supply by unplugging or
tripping the circuit breaker.
Upper lighting
^ Grasp the front of the light cover with
both hands, and slide it back.
^ Carefully pull the cover forward and
out.
26
Never touch a halogen bulb with
bare fingers.
When inserting a glass halogen bulb
always hold with a soft cloth.
^ Remove the defective light bulb.
^ Place the new bulb in the socket.
Halogen bulb type:
20 W/12 V/socket GY 6.35.
^ Slip the rear of the light cover back
into position, then pull it forward and
into place.

Advertisement

Table of Contents
loading

Table of Contents