Gree GDN35BB-A3EBA2A User Manual page 15

► Operation Failure
PROBLEM
The power indicator
does not light up
when power is turned
on.
The "Bucket Full"
indicator is lit up
and the unit is not
working.
The unit can be
powered on, but
dehumidification
never starts.
► Inefficient Dehumidification
PROBLEM
The unit offers poor
dehumidification
performances.
TROUBLESHOOTING
POSSIBLE CAUSES
Power might not be supplied properly
or the power plug might not be inserted
into the socket correctly.
The fuse may have been blown.
The drain bucket may not have been
properly inserted in the unit.
The drain bucket may be full.
The drain bucket might have been
removed.
The humidity level might have been set
too high.
POSSIBLE CAUSES
There might be objects blocking the air
inlet and outlet.
The air filter may be dusty, obstructed
or clogged.
Doors and windows may have been left
opened.
The ambient temperature may be too low.
POSSIBLE SOLUTIONS
▪ Is there a power outage ? If so, wait for the power
to be restored.
▪ If not, check if the power circuit or socket is
damaged.
▪ Check if the power plug has loosen from the power
socket.
▪ Check if the power cord is damaged.
Replace the fuse.
Put the drain bucket back correctly in the unit.
Empty the drain bucket then put it back in the unit.
Put the drain bucket back in the unit.
If you want the air to be drier, lower the humidity
level so the unit can start its dehumidification
function.
POSSIBLE SOLUTIONS
Make sure there are no curtains or furniture that
could be obstructing the air vents.
Clean the air filter.
Make sure all doors, windows and other openings to
the outside are closed.
Warm temperature is good for dehumidification. Low
temperatures significantly reduce the efficiency of
the unit. Place the dehumidifier in a room where the
ambient temperature stays above 5 °C (41 °F).
15