7. Moving and Transporting
7-1. Moving and transporting
In this section, moving refers to "carrying of the equipment within a facility" and transporting refers to
"transferring using a vehicle or sending the probe for repairs".
7-2. Preparing the probe and accessories for moving
Store in the storage case and the storage tray after performing the procedure in section 5 "Cleaning, disinfection
and sterilization".
7-3. Packing for transportation
Store in the storage case and storage tray after performing the procedure in section 5 "Cleaning, disinfection
and sterilization" and then put the storage case and the strage tray in a cardboard box for additional protection.
7-4. Environmental conditions during transportation
Ambient temperature:
Relative humidity:
Atmospheric pressure:
Note
This equipment is a precision equipment and is vulnerable to physical impact. Protect it by packing it
properly for transportation.
Contact one of our offices and/or distributor's offices listed on the back cover when transporting the probe.
–10°C to 50°C
14°F to 122°F
10% to 90%
700 hPa to 1060 hPa
-49-
MN1-5315 Rev. 14