Attaching Of The Needle Guide, The Guard Plate And The Lock Plate - Hitachi UST-9135P Instruction Manual

MN1-5315 Rev. 14

4-2. Attaching of the needle guide, the guard plate and the lock plate

(1) Insert the lock plate into the probe from the front mark side as deep as it will go by aligning the groove of the
lock plate with the probe guide.
(2) Insert the appropriate needle guide for the needle to be used in the "V-groove for needle guide
insertion".
Gauge size indication
(3) Slide the lock plate to the front mark side. This locks the needle guide in place.
.
Probe guide
(The opposite side also.)
Guard plate
Needle guide
Lock plate
-24-
Lock plate