Scanning Regular, Non-Damaged Photos - Microtek ScanMaker i800 Scanning Manual

Color Matching
features
10 ScanMaker i800 Pro Scanning Guide

Scanning Regular, Non-Damaged Photos

1. Raise the scanner lid, and place the
photo to be scanned face down on
the scanner glass surface. Position
the top end of the photo towards the
back of the scanner.
Make sure the Black Mat is attached
on the scanner lid, then close the
scanner lid before you launch
ScanWizard Pro.
2. Launch ScanWizard Pro either as a stand-alone by clicking the program icon, or by
using the File-Import / File-Acquire command from your image-editing program
(such as Adobe Photoshop). Alternatively, you can start ScanWizard Pro from the
Applications folder in your Mac OS X.
The first time you launch ScanWizard Pro, you will be prompted to set up color
matching for your scanner. If you are not sure about what to do, simply click the
OK button to accept the settings. You can always change the settings at a later
time.
For more information, see the Color Matching Setup section in the ScanWizard
Pro Reference Manual in the Microtek ScanMaker i800 Pro CD-ROM.
3. Go to the Preview window of
ScanWizard Pro, and choose
Reflective from the Scan
Material menu.
The Black Mat
comes
preattached to
the scanner lid.