3
3.2 ASSEMBLY INSTRUCTIONS
3.2.8.2 CDL ADJUSTMENT
The CDL is delivered adjusted, but if it still needs further adjustment, please follow the indications below according
3.2.8.2.1
to your case.
AIM
0,5
To carry on a fine tuning it's only needed to loose the five
To carry on a fine tuning it's only needed to loose the five
indicated screws without fully remove it. The clutch base hole,
indicated screws without fully remove it. The clutch base hole,
grants to move ± 7,5 mm.
grants to move ± 7,5 mm.
88
A
MOD MC PREMIUM PM
B
If the regulation needed is more than ± 7,5 mm, you'll need to
If the regulation needed is more than ± 7,5 mm, you'll need to
fully remove the screws with the aim to change their position in
fully remove the screws with the aim to change their position in
the carriage (except two screws placed in the carriage long hole).
the carriage (except two screws placed in the carriage long hole).
DO NOT FULLY
REMOVE