Table of Contents
Advertisement
2
2.2 ASSEMBLY INSTRUCTIONS
2.2.8.2 CDL / CLUTCH ADJUSTMENT
The CDL is delivered adjusted but if it needs further adjustment, please follow the indications below according to
2.2.8.2.2
your case.
AIM
0,5
To carry on a fine tuning it's only needed to loose the five
To carry on a fine tuning it's only needed to loose the five
indicated screws without fully remove it. The clutch base hole,
indicated screws without fully remove it. The clutch base hole,
grants to move ± 7,5 mm.
grants to move ± 7,5 mm.
46
A
MOD MC PREMIUM PM
B
If the regulation needed is more than ± 7,5 mm, you'll need to fully
If the regulation needed is more than ± 7,5 mm, you'll need to fully
remove the screws with the aim to change their position in the
remove the screws with the aim to change their position in the
carriage. (Except two screws placed in the carriage long hole).
carriage. (Except two screws placed in the carriage long hole).
DO NOT FULLY
REMOVE
Advertisement
Table of Contents
