Microtek ScanMaker 6000 Supplementary Manual page 13

4. Click the Original button, and choose Negative Film.
When selected, the light source of the LightLid 35 lights up.
5. Click the Preview button to perform a preliminary scan of the image.
6. In the preview window, you can resize the scan frame (floating dotted lines)
around the image by dragging on the edge or corner of the scan frame to
determine the final size of the actual scan.
7. Click the Scan to button to scan the image.
After the scan, the scanned and processed image can be saved as a file, opened
in an image-editing program, sent to a printer, attached in an e-mail, or uploaded
to a website.
To obtain best
results when
scanning with
the LightLid 35,
set the scan
Resolution to a
minimum 600 dpi
and the Scaling
to 100%.
ScanMaker 6000 Supplement 13