Spycentre Security 2007 Manual

SpyCentre Security® Since 1993
2007 - WIFI Router Hidden Camera: TinyCam Pro Android/iPhone Application
To start:
● Insert an SD card into the SD slot under the hidden plastic cover on the right-hand side of the
unit
● Power the device using the included cable and press the power button for a couple of seconds
to activate the camera
● While you wait for the device to boot up, download the "TinyCam Pro" application from the
Apple or Google Play store
● Enter your phone's settings and then go to WIFI settings, where you will look for the WIFI
signal from the camera
● Connect with the WIFI of the camera, ex: AIS-xxxxxx-xxxxx. Your phone may ask you to pick
between Cellular or WIFI. Select the WIFI option, open the "TinyCam Pro" App, and wait a few
moments
● Click the + button at the bottom of the screen and select the mode to add the camera: "LAN
Search," "Direct Mode," or "Add QR Code." Use "LAN Search" if adding a camera already
connected to your network. Or use "Direct Mode" after you've connected directly to the
camera's WIFI or by scanning the "QR Code" on the device
● Name the device, type in the password (123456), and save
● Click on the camera when back at the main page. It will ask you to change the default
password. Type in the default password (123456), then create your own
Note: If the setup process has been completed, and you cannot connect to the camera, hold
the "Reset" button next to the SD card slot for about 10 seconds and then repeat the process
after the camera has rebooted.
1-800-292-7748