Spycentre Security 6757 Quick Start Manual

Spycentre Security 6757 Quick Start Manual

1080p zmax microcam

Advertisement

Quick Links

SpyCentre Security® Since 1993
1-800-292-77488
6757 - 1080P Zmax MicroCam
NOTE:
Ensure the unit is fully charged (about 6-8 hours) and plug-in an SD card (up to 256GB).

HOW TO FORMAT HIGH CAPACITY SD CARDS (64-256GB):

1. Insert an SD card and plug the device in for power, but do not turn it on. The orange charge
light will come on.
2. Insert a pin or something small and thin into the "Upgrade" hole and release when the orange
charging light starts to flash red.
3. Press the "Upgrade" button again and release it when the flashing red light starts to flash
green.
4. Disconnect the camera from the power source, and the SD card will now be formatted for use
with this camera.

HOW TO TURN ON THE CAMERA:

1. Hold down the power button on the right side of the unit for 3-5 sec. The indicator light will turn a solid
green color; once the indicator light is flashing green, the device is now recording.
NOTE:
The camera's default record mode is Continuous Record mode.

HOW TO TURN CAMERA OFF:

1. Hold down the power button on the right side of the unit for 3-5 sec. The indicator light will turn a solid
orange color; once the orange color is gone, the camera is now off.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6757 and is the answer not in the manual?

Questions and answers

Summary of Contents for Spycentre Security 6757

  • Page 1 SpyCentre Security® Since 1993 1-800-292-77488 6757 - 1080P Zmax MicroCam NOTE: Ensure the unit is fully charged (about 6-8 hours) and plug-in an SD card (up to 256GB). HOW TO FORMAT HIGH CAPACITY SD CARDS (64-256GB): 1. Insert an SD card and plug the device in for power, but do not turn it on. The orange charge light will come on.
  • Page 2 CONTINUOUS RECORD MODE 1. This setting will keep the unit turned on and continuously recording with roughly 9-hours of battery life. With no adjustments made through the Camera Widget, this will be the default recording mode when turning on the device. MOTION RECORDING MODE: This setting is made available through the Camera Widget for Z82/Z86 desktop application, which works with both Windows and Mac computers:...
  • Page 3 How to Playback files on a PC: 1. Either connect the device to a computer with the included USB cable or remove the Micro SD card from the device and connect it to the computer with an SD card reader. 2.
  • Page 4 How to Playback files on a Google ChromeBook: 1. Either connect the device to a computer with the included USB cable or remove the Micro SD card from the device and connect it to the computer with an SD card reader. 2.
  • Page 5 How to download and use VLC media (Windows) 1. www.videolan.org 2. Click the blue “download VLC.” 3. It will open a new window and begin downloading. 4. If it does not automatically begin downloading, press “Click here” and select one of the mirrored sites. 5.

Table of Contents