Spycentre Security 6817 Manual

SpyCentre Security® Since 1993

How to charge the battery:

● Unscrew the pen to expose the built-in USB port, and connect the recorder to a PC or
USB power supply
● It takes 8 hours on the initial charge and 4 hours after
● Blinking blue light
● Solid blue light

How to record a video file:

● Press and hold the on and off button for 1-3 seconds. A blue LED will be visible; it will
blink green a few times and then disappear, indicating a recording has begun.
● If held longer than 3 seconds and released while still showing a blue LED, it will blink
green a few times and then turn solid blue to indicate standby mode
● A solid blue LED light will come on, then turn green, blink a few times and disappear,
indicating a video recording has begun
● To stop and save the recording, tap the on and off button
● A solid blue light will come on, indicating the device is in standby mode
Note: If no action is taken in standby mode for one min. The device will power off.
● To turn it off, Press and hold the on and off button for 5 seconds or until you see a green
light that will blink four times quickly and disappear, indicating the device is now off
Note: If the device runs out of power during the recording, it will finalize and save the file
before the battery dies.
6817- 2K Ultra Spy Pen Camera
= Charging
= Fully charged
1-800-292-7748