To Display Color Information For A Pixel Or An Averaged Area - Microtek ScanMaker 4700 User Manual

Preview window
3. Choose your options.
Select the sample size options from the drop-down list. For instance, the 1
by 1 option will display the value of one pixel — the one in the middle of
the Color Output Meter. The 3 X 3 option reads the average value of a 3-
pixel by 3-pixel area.

To display color information for a pixel or an averaged area:

1. Click on the Picker tool.
2. As you pass over a point in the image, observe the Info window —
the RGB values will be displayed in the Color Output Meter. These
values are based on the sample size you selected.
file:///D|/sw56/adv_Preview_window_detail.htm (11 of 11) [8/15/03 3:59:29 PM]