Advertisement
How to programming AIS data (own vessel information) for Onwa AIS plotter
1) Select MMSI setup in MAIN MENU-> SETUP -> MMSI setup as shown below :
2) Enter password (default is "000000") and scroll the cursor to [ENT] as shown then press [ENT] key to
confirm :
3) The below AIS SETUP window will pop up as shown :
Advertisement
Table of Contents
Related Manuals for Onwa KP-8299A
Summary of Contents for Onwa KP-8299A
- Page 1 How to programming AIS data (own vessel information) for Onwa AIS plotter 1) Select MMSI setup in MAIN MENU-> SETUP -> MMSI setup as shown below : 2) Enter password (default is “000000”) and scroll the cursor to [ENT] as shown then press [ENT] key to...
- Page 2 4) Scroll the cursor to [Read] and press [ENT] key to read the stored information (Call Sign, Name and AIS Module firmware ver. ) from the preset memory. 5) Change the information by combination of [arrow keys] and [ENT] according to actual data of your boat, MMSI, boat’s name, Ship type, boat size etc.
- Page 3 Note : Don’t care the Tracking group ID if you are not necessary to use the plotter with ONWA AIS tracking buoy. 6) Now you can press [ESC] key to exist the AIS setup. You can check the saved AIS setup information by the following steps : 6.1) Select AIS screen and press [Menu] ->...
Need help?
Do you have a question about the KP-8299A and is the answer not in the manual?
Questions and answers