Maintenance And Security; Replacing The Projection Lamp - Microtek MS4 User Manual

Replacing the Projection Lamp

The projection lamp should be replaced when it burns out. It should only be replaced with a certified
replacement part, which you can order from your local dealer.
Important:
1. The lamp contains a certain amount of mercury and should be disposed of according to local or-
dinance regulations.
2. Avoid touching the glass surface of the new lamp: Doing so may shorten its operation life.
Warning:
Be sure to turn off and unplug the projector at least an hour before replacing the lamp. Failure to do
so could result in a severe burn.
1.
Remove the screw on
the lamp compartment
cover.
2.
Remove the lamp
compartment cover.
M
AINTENANCE AND
S
ECURITY