Adjusting The Projector Level - Microtek MS4 User Manual

Adjusting the Projector Level

Take note of the following when setting up the proj ector:
The projector table or stand should be level and sturdy.
Position the projector so that it is perpendicular to the screen.
Be sure cables are not in the way or can cause the projector to be knocked over.
1.
To raise the level of the projector, lift the projector [A] and press the height-adjuster
button [B].
The height-adjuster drops down [C].
2.
To make minor adjustments, rotate the side foot [D].
3.
To lower the level of the projector, press the height-adjuster button and push down
on the top of the projector.