Status Menu
Press the Menu button to open the Main menu. Press the cursor
menu. Press the cursor
button to move up and down in the Status menu.
I
TEM
Video
Displays the resolution and refresh rate of the connected video device.
Information
Active Source
Displays the active source.
Software
Information about the firmware version.
Version
Lamp Hours
Number of hours lamp has been in Normal use and number of hours lamp
has been in Eco use.
Lamp Mode
Toggles between Normal and ECO lamp modes. ECO mode uses less power
but decreases the lamp brightness.
Lamp Hour
After replacing the lamp, this item should be reset. Refer to "Replacing the Pro-
Reset
jection Lamp" on page 24.
button to move to the Status
D
ESCRIPTION
D
EFAULT
These
items are
display
only.
Normal
—