Display Settings; Traffic Settings - ZENEC Z-N966 Navigation User Manual

4.3.6 Display settings

You can modify the following settings:
Button

4.3.7 Traffic settings

You can modify the following settings:
Button
It shows the current voice guidance profile. Tap it to select a new
profile from the list of available languages and speakers. Tap any of
these to hear a sample voice prompt. Just tap
selected the new spoken language.
Different voice profiles are capable of different levels of service:
• Natural Voice (street names not announced): These pre-
recorded sounds can only tell you basic information about turns
and distances.
• TTS Voice (street names announced): These computed voices
can read out complex instructions, street names or system
messages.
You can set the measurement units and time/date format to be used.
ZENEC may not support all the listed units in some voice guidance
languages.
By default, the time zone is taken from the map information and
adjusted by your current location. Here you can manually set the time
zone and the daylight saving time.
When animation is turned on, buttons on menus and keyboard
screens, and screen transitions are animated.
Enable or disable the Traffic reception that can receive real-time traffic
information. The rest of the buttons below are all related to the Traffic
function and are available only if the receiver is enabled.
Function
Function
75
when you have