Selecting An Address; Entering An Address - ZENEC Z-N966 Navigation User Manual

11. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap
parameters, or tap

3.1.2 Selecting an address

If you know at least a part of the address, this is the quickest way to select your destination.
Using the same screen, you can find an address by entering the following information:
• The exact address, including the house number, see page 27
• The centre of a town, see page 29
• The midpoint of a street, see page 30
• An intersection, see page 31
• Any of the above, starting the search with the postal code, see page 32.

3.1.2.1 Entering an address

To enter an address as the destination, perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap and
3. By default, ZENEC proposes the country and town where you are (or in case there is
no valid GPS position, the country and town of the last known position). If necessary,
change the country, by performing the following steps:
a. Tap the Country field.
b. In the Select Country screen, you can immediately select a country from the list
below the input field or start entering the first few letters of the country on the
keyboard.
to start your journey.
.
27
to modify the route