Selecting A Location On The Map - ZENEC Z-N966 Navigation User Manual

7. The route is calculated and the map appears showing the entire route, where you can
check route information and route alternatives. Tap
parameters, or tap

3.1.8 Selecting a location on the map

To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
2. Tap the location that you want to select as your destination. The cursor (
appears there.
3. (optional) If needed, tap
location.
Tip! If you already have a planned route, tap
the selected location to your route.
4. Tap
to start your journey.
to list the Places near the selected point or to save this
to select the cursor as the destination.
44
to modify the route
and
)
to add